View Our Elpro Technologies Best Quality Products
Creating a niche of Data Acquisition Modules such as RS232/485 to 4 Port RS485 HUB, AC Converter, RS232 to RS485 Converter Port Powered, Converter Port Powered, RS232 Isolation Protector, RS232 to RS485 Converter and many more items at its best, with utmost quality.
Product Details Below,
| Interface Protocol | EIA RS-2332/485 |
| Interface Number | 1x RS-232 |
| Data Bit | 5bit, 6bit, 7bit, 8bit |
| Stop Bit | 1bit, 1.5bit, 2bit |
| Baud Rate | 300 bps~115200 bps |
| Port Protection | 2 KVAC isolation protection, 3 |
Communication Parameters,
TLC422 is the interface converter between RS-232 and RS-422. It is powered from serial port (such as COM port of computer ), no outside power needed. Small size, long transmission distance, high rate, stable performance. It applys DB9 common serial port. It is used widely in the field of electricity, industrial automatic control, IC card billing system. It is a high quality low price data interface conversion product.
Product Details Below,
| Standards | EIA RS-232C, RS-422 standard |
| Working mode | Asynchronism, point to point, 4 wire full-duplex |
| Transfer rate | 300~115200bps |
| Transfer distance | RS-422 side 1.2Km |
| Port protect | 1500W surge protection |
| Connector | RS-232 side DB9 female |
Model232I is a kind of RS232 system communication serial port optic isolation product. This product support transmission rate as high as 912600bps, no external power needed, optic electric isolation 5KV, is applicable in a tough environment. According to different customer need, separately corresponds to three line serial port application with RTS/CTS (or DTR/CTS). Transmission distance at 9,600bps is 10m, stable performance.
Product Details Below,
| Standard | EIA RS-232 standard |
| Working | Asynchronous, point to point |
| Transfer rate | 300-912600bps |
| Isolate signal | TXD, RXD, GND |
| Transfer distance | 5m |
| Isolation | 5000V |
The SW485WA is an industrial grade bi-directional port-powered 2500V opto-isolated RS232 to RS485 converter in a 9 pin format. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers. The SW485WA has a DB9 female connector on the RS232 side and either a DB9 male connector or 3 bit terminal block on the RS485 side.
| Baud Rate | 300~115200bps |
| Isolated Converter | Yes |
| Port Power | 2500 V |
| Standards | EIA RS-232C, RS-485, RS-422 standard |
| Working mode | Asynchronism, point to point or multi point, 2 wire half-duplex |
| Max number of drops | 128 nodes |
A quick and easy way to expand your PC's port count and to adapt serial devices to your USB PC. Edge port USB-to-Serial converters are intelligent expansion units that connect to a PC, thin client or server via a USB port. USB4232 provides four RS-232 serial ports, is compliant with USB 1.1 and 2.0 specifications, and meet the 480 Mbps high-speed requirement of Hi-Speed USB 2.0. Using your computer’s USB ports to connect serial devices reduces the total cost of ownership, investment in hardware, and long term management and integration costs.
Product Details Below,
| Minimum Order Quantity | 1 Unit |
| Color | White |
| Material | Iron(shell) |
| Dimensions | 160.0mm x 94.0mm x 28.0mm |
| Operating Temperature | - 40 to 85 Degree C |
| Weight | 500 g |
| Humidity | 5 to 95 % |
USB8485I is a kind of USB to 8 port RS485/422 converter, the USB8485I can let PC or work station’s USB port connect 8pcs RS-485 or RS-422 comfortable. USB8485I provides four RS-485/422 serial ports, is compliant with USB 1.1 and 2.0 specifications, and meet the 480Mbps high-speed requirement of Hi-Speed USB 2.0. Using your computer’s USB ports to connect serial devices reduces the total cost of ownership, investment in hardware, and long term management and integration costs.
Product Details Below,
Model485P is a high performance, more function RS-232/485/422 interface converter. The product configure out connect power, optic-electrical isolation more than 2.5KV. Have small volume, far transmission distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is an interface convert product that have good between performance to price. Adopt itself adapt interface technique, no use for setup switch.
USB485 is a kind of USB to RS-485/422 intelligent converter. It is the best solution for the communication between USB and RS-485/422. Compared with RS-232 to RS-485/422 converter, USB to RS-485/422 converter has many advantages. Product Details Below,
Driver Support:
Operating System: Support Windows98/ME and Windows2000/XP, Windows Server 2003/2008, Windows 7/Vista
Power requirements:
No power supply needed, powered from USB
Consumption: Static consumption less than 80mA, dynamic average consumption less than 150mA
Physical Characteristics:
Weight: Products only: 70g
Packaged: 120g
Dimension: 70mm×35mm×18mm(wiring 1.5m)
Standard: EIA RS-232 standard
RS-232 signal: TXD, RXD, GND
Working: Asynchronous, point to point
Transfer rate: 300-115200 bp s, as to sense serial signal rate
Isolate signal: TX D, RX D, GND
Transfer distance: 2 Km(9600 bps)
Isolation: 2500 V
Port type: DB9F, DB9M(wire)
USB232/485/422 is kind of industrial USB to RS-232/485/422 converter, plug and plag, 9-48VDC external power supply or USB power supply or both of them, it support DIN-Rail and wall mounting installation, can support latest operation system, wide working temperature, 2KVAC isolation protect, easy using for your projects.
Specifications:
USB:
Compliance: USB1.1/2.0 compliant
Connector: USB type A
Speed: 12 Mbps(full-speed)
Serial interface:
Numbers of ports: 1
Serial standards: RS-232
Connector: DB9 male
Serial Line protection
ESD Protection: 15 KV embedded
Performance:
Baudrate: 300 bps to 115.2 Kbps
Serial Communication Parameters
Data Bites: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF
FIFO: 128 bytes
Instantly converts any standard monitor (LCD & CRT) or notebook computer into a touch-interactive device at a very affordable cost. Easy installation and maintenance. Compatible with WIN 98 up to Win 7 & 8, Linux, & Mac 9.22-10.x.
Measure your monitor size and compare to the sizes of the touch screens. Compare monitor's view area (VW x VH) with the active area of the touch screen. It is ok if the touch screen's active area is slightly larger than the monitor's view area.